Cast-A-Seal is a cast-in, flexible, watertight pipe-to-structure connector. Its design allows it to be placed into the structure formwork, and it is cast into the concrete when it is poured, eliminating the time and expense of forming or coring holes. The large keylock of Cast-A-Seal is embedded in the concrete, creating a watertight seal. After stripping, the Cast-A-Seal is unfolded to the outside of the structure and attached to the pipe with stainless steel take-up clamps.
For general literature, specifications or selection guides for our full Cast-A-Seal product line, you can download any of the literature below. Otherwise, check out our individual products for more specific details.
Document Downloads
Download Product Literature
Cast-A-Dapter
Cast-A-Dapter is a rubber adapter that provides flexible, watertight sealing of single or multiple pipes and conduits into on-site treatment tanks, and pump stations. Used with our Cast-A-Seal® 402 cast-in flexible connector, Cast-A-Dapter is available in a wide variety of pipe diameter combinations to meet the needs of any tank design or specification.
Cast-A-Seal 12-08
For 8" pipe only - The Cast-A-Seal 12-08 is a simple cast-in pipe- to-manhole connector that offers a watertight flexible connector that is cast into the structure when the concrete is poured. The key lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.
Cast-A-Seal 402/402F
The Cast-A-Seal 402/402F is a simple cast-in pipe-to-manhole connector that offers a watertight flexible connector that is cast into the structure when the concrete is poured. The key lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.
Cast-A-Seal 603
The Cast-A-Seal 603 boot type connector is a simple cast-in pipe- to-manhole structure connector for 8-18” (200- 450mm) PVC pipe that offers a watertight flexible connector that is cast into the structure when the concrete is poured. The key lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.
Cast-A-Seal 802
The Cast-A-Seal 802 boot connector is a simple cast-in pipe-to- manhole connector for straight-wall structures only, that offers a watertight flexible connector that is cast into the structure when the concrete is poured. The key lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.
Cast-A-Seal 964
The Cast-A-Seal 964 is a simple cast-in pipe- to-manhole connector that offers a watertight flexible connector that is cast into the structure when the concrete is poured. The key lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.
Econoseal
The Econoseal is a simple cast-in pipe- to-manhole connector that offers an easy installation process in precast production facilities and in the field for contractors. The key-lock is integrally cast-in during the production process providing a secure seal for storm water and sanitary collection systems.
Other Boot-Type Manhole Connectors
If you're looking for boot-type manhole connectors for cored or cast holes, then this product line would be the best fit for a variety of your project needs.
Boot-Style Connectors
DIGITAL CATALOG
For a comprehensive overview of our full-line of cast-in boot connectors that are cast-in to structures, you can download, view or share the catalog here. Inside the catalog you will find:
- Cross-reference charts
- Installation videos
- Specifications for submittal's
<